Setup (2.); Identification (2.1); Tag (2.1.1.); Descriptor (2.1.2.) - Siemens SITRANS LR560 Operating Instructions Manual

Parameter Reference

8.2 SETUP (2.)

8.2 SETUP (2.)
Note
Handheld programmer
Values shown in the following tables can be entered via handheld programmer.
8.2.1

IDENTIFICATION (2.1)

8.2.1.1

TAG (2.1.1.)

Text that can be used in any way. A recommended use is as a unique label for a field device
in a plant. Limited to 8 ASCII characters. Read only on device, Read/Write using SIMATIC
PDM and AMS.
8.2.1.2

DESCRIPTOR (2.1.2.)

Text that can be used in any way. Limited to 16 ASCII characters. No specific recommended
use. Read only on device, Read/Write using SIMATIC PDM and AMS.
8.2.1.3

MESSAGE (2.1.3.)

Text that can be used in any way. Limited to 32 ASCII characters. No specific recommended
use. Read only on device, Read/Write using SIMATIC PDM and AMS.
8.2.1.4

INSTALLATION DATE (2.1.4.)

Date the device was first commissioned. Read only locally. Can be written via HART (dd mm
yyyy).
8.2.2

DEVICE (2.2.)

8.2.2.1

HARDWARE REVISION (2.2.1.)

Read only. Corresponds to the electronics hardware of the device.
8.2.2.2

FIRMWARE REVISION (2.2.2.)

Read only. Corresponds to the firmware that is embedded in the device.
8.2.2.3

LOADER REVISION (2.2.3.)

Read only. Corresponds to the software used to update the device.
8.2.2.4

MENU TIMEOUT (2.2.4.)

Factory setting:
Setting range:
Purpose:
92
120 s
15 to 65535 s
Time menu stays visible before switching back to Measurement view if no
key is pressed.
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE