6.7.5.3
Requesting an Echo Profile
1. Enter
PROGRAM
mode
2. Accessing
features
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE
Navigate to: Level Meter > Diagnostics (3.) > Echo profile (3.1.).
Press RIGHT
to request a profile.
①
TVT
②
Confidence
③
Distance from Low Calibration Point to vertical cross-hair
④
Algorithm: tF (trueFirst)
⑤
Distance from flange face to target
⑥
Echo
Use UP
or DOWN
feature becomes active.
Move a cross-hair
Press RIGHT
crease.
Zoom into an area
Position the intersection of the cross-hairs at the center of
that area, select Zoom, and press RIGHT
Update the profile
Select Measure and press RIGHT
Return to the previ-
Select Exit then press RIGHT
ous menu
6.7 Commissioning via handheld programmer
to scroll to an icon. When an icon is highlighted, that
to increase the value, LEFT
to Zoom out.
Commissioning
to de-
. Press LEFT
.
.
59