Uniden BCD996XT User Manual page 507

<COMMAND WXS>
Get/Set Weather Settings
Controller → Radio
WXS[\r]
WXS,[DLY],[ATT],[ALT_PRI],[RSV],[AGC_ANALOG],[RSV][\r]
Radio → Controller
WXS,[DLY],[ATT],[ALT_PRI],[RSV],[AGC_ANALOG],[RSV] [\r]
WXS,OK[\r]
[DLY]
[ATT]
[ALT_PRI]
[AGC_ANALOG]: AGC Setting for Analog Audio
Get/Set Weather Priority Settings.
This command is only acceptable in Programming Mode.
<COMMAND SGP>
Get/Set SAME Group Settings
Controller → Radio
SGP,[SAME_INDEX][\r]
SGP,[SAME_INDEX],[NAME],[FIPS1],[FIPS2],[FIPS3],[FIPS4],[FIPS5],[FIPS6],
[FIPS7],[FIPS8][\r]
Radio → Controller
SGP,[NAME],[FIPS1],[FIPS2],[FIPS3],[FIPS4],[FIPS5],[FIPS6],[FIPS7],[FIPS8][\r]
SGP,OK[\r]
[SAME_INDEX]: SAME Index
[NAME]
[FIPS1-8]
Get/Set SAME Group Settings.
In set command, only "," parameters are not changed.
The set command is aborted if any format error is detected.
This command is only acceptable in Programming Mode.
: Delay Time
: Attenuation
: Weather Alert Priority
: SAME Group Name (max.16char)
: FIPS Code (6digit:000000-999999, or ------ means none)
(-10,-5,-2,0,1,2,5,10,30)
(1 – 5 )
258
(0:OFF / 1:ON)
(0:OFF / 1:ON)
(0:OFF / 1:ON)