Uniden BCD996XT User Manual page 39

MotorolaTrunkedSystems < UnidenMan4 < TWiki
Programming a Motorola System
To program a Motorola system, you'll need to program the required elements in following order:
Create a system
1. Go to the
2. The scanner will prompt you for the System Type. Select MOT .
3. When the scanner prompts you confirm, tap YES .
4. The scanner creates the system with a default name. Select
5. If you need to change any of the system properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
System properties
All of these options can be found under your scanner's
menu and option name on each scanner are listed beside the property.
Property
Fleet map
Name
Number tag
Automatic Gain Control
(AGC)
Record
Delay time
Emergency alert
ID format
ID scan/search
Priority ID scan
Status bit
Copy a system
Delete a system
file:///C|/Documents%20and%20Settings/POpitz/My%20D...p/CDImage_090515/Manual/MotorolaTrunkedSystems.html (4 of 8)5/26/2009 11:11:53 AM
Program System menu and choose New System .
Edit Fleet Map
systems only)
Edit Name
Set Number Tag
BCD396XT and BCD996XT:
BC346XT and BCT15X: Not available
BCD996XT and BCT15X:
BCD396XT and BC346XT: Not available
Set Delay Time
Emergency Alert
Set ID Format (DEC/HEX)
ID Scan/Search
Priority ID scan
Set Status bit
Copy System
Delete System
Program System
Option name
Required
(Required for Motorola Type I or Type I/II Hybrid
Recommended
Optional
Set Record
Available operations
Edit Name if you want to change it.
menu. If necessary, the sub-
Set Audio AGC