Uniden BCD996XT User Manual page 668

Location Based Scanning
This operation controls the lockout state for each group or site when the scanner is connected to a GPS
unit.
This works automatically based on the location data from GPS when the feature is set to "On" in Set GPS
Enable.
If the scanner goes within the location's range for a group or site, the scanner displays "Location Unlock"
on the first line and the group name or the site name on second line.
When the scanner goes outside the set range, the group or site is automatically temporarily locked out.
The scanner displays "Location L/O" on first line and the group name or the site name on second line.
This operation does not affect systems/sites whose SQK is disabled.
If a GPS is detected as soon as the scanner is turned on, the scanner displays "GPS CONNECTED" instead of
displaying individual lock/unlock messages for groups and sites. It applies the location-based rules to all
systems at one time.
Thursday, May 14, 2009
Locati on Unlock
Si te 1- 1
S0: - - - - - - - - - -
GRP - - - - - - - - - -
Locati on L/O
Si te 1- 1
S0: - - - - - - - - - -
GRP - - - - - - - - - -
GPS CONNECTED
S0: - - - - - - - - - -
GRP - - - - - - - - - -
110
GPS
MOT
GPS
MOT
GPS