Uniden BCD996XT User Manual page 187

BCD996XTCloseCallMode < UnidenMan4 < TWiki
Close Call Mode
This page applies only to the BCD996XT. For other models see:
BCD396XT and BC346XT Close Call Mode
BCT15X Band Scope Mode
When the scanner is in Close Call mode, it performs a close call check every 2 seconds. The scanner switches
to the selected bands and searches for unusually strong signals (indicating the transmitter is probably
somewhere close by). After the close call check, the scanner returns to its previous function.
In Close Call Do Not Disturb mode, the scanner does not perform a Close Call check if it is already receiving
an audio transmission. This prevents the audio from cutting out every 2 seconds.
In Close Call Only mode, the scanner only performs Close Call checks.
The Close Call menu lets you change the operation settings of the Close Call feature. You can change the
overall Close Call options through the
Key Operation in Close Call Mode
Key Name
(2nd
operation)
Action On
Tap
FUNCTION
+ Tap
When
holding on a
frequuency
Key Name
(2nd
operation)
Action on:
file:///C|/Documents%20and%20Settings/POpitz/My%20...p/CDImage_090515/Manual/BCD996XTCloseCallMode.html (1 of 4)5/26/2009 11:12:42 AM
Srch/CloCall Opt
PRIORITY
1 (Search 1)
NA
NA
NA
Weather
4 (IF exchange)
menu.
2 (Search 2)
Turn on/off the associated Close Call range.
Start the search range assigned to this Search Key.
Input the corresponding number in Direct Entry mode.
5 (Level offset)
3 (Search 3)
6 (Display mode)