Uniden BCD996XT User Manual page 349

Set Delay Time
This setting controls how long the scanner stays on Mute Off state after a transmission ends.
Turn [Scroll Control] to select setting value from:
0 sec
1 sec
2 sec
5 sec
10 sec
30 sec
Infinite
Then press [E / yes / gps] to accept and return to the previous menu.
Set Alert
You can set these options in this menu.
Set Alert Tone
Set Alert Light
Press [E / yes / gps] to enter the setting.
Set Alert Tone
You can set whether the scanner should sound an Alert Tone when a tone-out channel becomes active*.
Off
Alert 1-9
If you select "Off", the scanner returns to the previous menu.
If you select "Alert1-9", the scanner goes to Alert Level selection.
Auto
Level1-15
Press [E / yes / gps] to accept the entry and return to the previous menu.
Thursday, May 14, 2009
No alert sounds.
The scanner sounds Alert1-9 with the Channel becomes active.
The alert is set to the same volume as normal audio.
The alert is fixed to the selected audio level.
100