Uniden BCD996XT User Manual page 848

EditChannel < UnidenMan4 < TWiki
Auto The scanner uses the default modulation type for this frequency's
band.
AM The scanner treats the frequency as an AM band.
NFM The scanner treats the frequency as a Narrowband FM band.
FM The scanner treats the frequency as an FM band.
WFM The scanner treats the frequency as a Wideband FM band.
FMB The scanner treats the frequency as an FM broadcast band.
Set Attenuator
Turn on attenuation to reduce the signal strength by 20 dB. You can turn on attentuation
for individual frequencies and channels or for entire sites. If you turn on attenuation for a
site, all frequencies within that site will be attenuated.
Set Priority
Choose whether this channel should be flagged as a priority channel so the scanner
checks it during priority scans and searches.
Set Alert
This menu lets you configure whether the scanner triggers an alert tone and light
whenever this channel or frequency becomes active. (Compare this to the system setting
Emergency
emergency flag.) The available options for
common to both types of alerts.
Set Record
This item lets you select whether the channel's audio is output from the RECORD OUT
jack on the back of the scanner. Note that you must also set the RECORD --> Marked
Channel System Option to fully enable this function.
Set Lockout
Decide whether you want to lock out the channel so the scanner will ignore it during
Scan and Search modes. Choose one of the following options:
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/EditChannel.html (3 of 5)5/26/2009 11:14:45 AM
Alert, which triggers a tone and light when a Talk Group contains an
(BCD996XT and
Set Alert Tone and
BCT15X only)
Set Alert Light are