BCD996XTHoldMode < UnidenMan4 < TWiki
Tap
Function + Tap
Double Tap
Function + Double
Tap
Press & Hold
Function + Press &
Hold
Reading the displays in Hold mode
The display information in Hold mode varies depending on the type of system the scanner is Holding on.
Conventional system display
When the scanner is holding on a conventional system, it displays the following screens:
file:///C|/Documents%20and%20Settings/POpitz/My%20...s/temp/CDImage_090515/Manual/BCD996XTHoldMode.html (4 of 7)5/26/2009 11:15:35 AM
Temporary lockout the
current channel. If the
current channel is
temporarily or
permanently locked out,
unlock it.
Temporarily lockout the
current system. If the
current system is
temporarily or
permanently locked out,
unlock it.
Permanently lockout the
current channel.
Permanently lockout the
current system.
Unlock all channels in the
current system.
Prompt to Unlock All
Systems (Y/N)? If you
press E/Yes the scanner
unlocks and enables all
systems, sites, and
searches.
Activate the FUNCTION mode for the next keypress.
"Latch" the FUNCTION mode. Scanner stays on the
current system and all keypresses use the FUNCTION
mode until you tap the control again.
NA
NA
NA
NA