Uniden BCD996XT User Manual page 908

BCD996XTScanMode < UnidenMan4 < TWiki
The scanner monitors the system until the hold time expires, then moves on to the next system.
Default Scan Mode
In the default Scan mode, the scanner checks frequencies in the following order:
1. Scans or searches any unlocked systems programmed to system Quick Keys (SQKs) in ascending order
starting with the system or site assigned to SQK #1.
In the system, the scanner first checks any unlocked groups assigned to group Quick Keys
(GQKs)in ascending order starting with the system or site assigned to SQK #1 (through GQK
#0).
The scanner then checks any remaining unlocked groups in that system in the order in which
you created them. If none of the groups in the system have been assigned to GQKs, the scanner
checks all unlocked groups in the order in which you created them.
The scanner does not check systems if the SQK is disabled.
The scanner does not check groups if the GQK is disabled.
2. Scans any remaining unlocked conventional systems (not assigned to an SQK) in alphabetical order
based on the system's Name. (The scanner checks groups within each system as described in step 1.)
3. Checks all unlocked trunked systems (not assigned to an SQK) in alphabetical order based on the
system's Name. (The scanner checks groups within each system as described in step 1.)
4. Searches through the designated general service frequencies (Public safety, Military, Air, etc.).
5. Searches through any unlocked frequencies saved in the Custom Search list.
6. Checks any frequencies saved in the Close Call Hits list.
Locked Items
The scanner does not check locked out items in either scanning or searching:
A system or site is considered locked if
its SQK is turned off
its
A group is considered locked if
the system or site containing it is locked
its GQK is turned off
its
A channel or frequency is considered locked if
the group containing it is locked
its
Key operation in Scan mode
Special keys
Turn the SCROLL knob to change the direction of the scan.
While monitoring a channel, rotate the SCROLL knob or press SCAN to resume scanning.
FUNCTION + turn the SCROLL knob to select a system. The scanner starts scanning at the system
file:///C|/Documents%20and%20Settings/POpitz/My%20...s/temp/CDImage_090515/Manual/BCD996XTScanMode.html (2 of 9)5/26/2009 11:15:46 AM
Set Lockout field is set to Locked Out or Temporary L/O
Set Lockout field is set to Locked Out or Temporary L/O
Set Lockout field is set to Locked Out or Temporary L/O