Uniden BCD996XT User Manual page 913

BCD996XTScanMode < UnidenMan4 < TWiki
FUNCTION
+ Tap
Press &
Hold
Key Name
(2nd
operation)
Action on:
Tap
Press & hold
FUNCTION
+ Tap
FUNCTION
+ Press &
hold
Key Name
(2nd
operation)
Action on:
Tap
FUNCTION
+ Tap
file:///C|/Documents%20and%20Settings/POpitz/My%20...s/temp/CDImage_090515/Manual/BCD996XTScanMode.html (7 of 9)5/26/2009 11:15:46 AM
Toggle Weather When monitoring a
Priority Mode frequency, toggle the IF
for that frequency.
Go to Weather
Scan mode.
GPS
Switch to the GPS Disable the custom search range assigned to this key. Tap again to
Navigation
display.
NA
Switch to the GPS Toggle the attenuator
Navigation
display.
NA Toggle the attenuator
state for all signals.
Menu
Enter the Menu
Mode.
Enter the "Search
for..." Menu.
NA
7 (Attenuation)
NA
state.
frequency that has a
valid reverse (input)
frequency, show the
current frequency (the
scanner returns to the
original frequency
when you release the
. / No (Decimal)
NA Disable the search
range assigned to this
NA
NA Switch the display
NA
8 (Reverse freq.)
enable.
NA
NA
If stopped on a
repeater reverse
frequency for the
key).
0
frequency, store the
key. Tap again to current frequency.
enable.
NA
frequency, store the
current frequency.
mode.
NA
9 (Modulation)
NA
Change the
modulation.
NA
Yes (Enter)
If stopped on a
If stopped on a