Table of Contents
Advertisement
Connecting the Computer and Installing the
Software (Network Connection)
Connect the machine to the computer via an Ethernet cable. Then, configure the network settings
in accordance with the network environment. Finally, install the printer driver.
This guide uses Windows 7/10 procedures for its examples. Procedures and screens might vary
depending on the operating system you are using.
Connecting the Machine via Ethernet Interface
Be sure to install all necessary network equipment, such as hubs, etc. before connecting the
Ethernet cable to the machine.
You can connect a 10BASE‐T or 100BASE‐TX cable to the machine.
• Ethernet cables are not supplied with this machine. Select your cable according
to the network environment.
1.
Open the port cover.
2.
Plug the Ethernet cable into the port.
Connecting the Computer and Installing the Software (Network Connection)
DYX017
DYX020
45
Advertisement
Table of Contents
