8. Maintenance
3.
Close the top cover.
Cleaning the Power Cable Plug
This section describes precautions for cleaning the power cable plug.
• Be sure to disconnect the plug from the wall outlet at least once a year and check for the
following:
•
There are burn marks on the plug.
•
The prongs on the plug are deformed.
•
If any of the above conditions exist, do not use the plug and consult your authorized
Roland DG Corporation dealer. Use of the plug could result in fire or electric shock.
• Be sure to disconnect the power cord from the wall outlet at least once a year and check
for the following:
•
The power cord's inner wires are exposed, broken, etc.
•
The power cord's coating has a crack or dent.
•
When bending the power cord, the power turns off and on.
•
Part of the power cord becomes hot.
•
The power cord is damaged.
•
If any of the above conditions exist, do not use the plug and consult your authorized
Roland DG Corporation dealer. Use of the plug could result in fire or electric shock.
• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area
around the prongs at least once a year. Allowing dust to build up on the plug constitutes
a fire hazard.
176
DYX028