Replacing An Ink Collector Unit - Roland VersaStudio BT-12 Operating Instructions Manual

1.
Open the [Printing Preferences] dialog box.
2.
Click the [Maintenance] tab.
3.
Click [Display Status Monitor].
4.
Check the ink collector unit status.

Replacing an Ink Collector Unit

• The following explains the warning messages on the plastic bag used in this product's
packaging.
• Keep the polythene materials (bags, gloves, etc.) supplied with this machine away
from babies and small children at all times. Suffocation can result if polythene
materials are brought into contact with the mouth or nose.
• Keep ink and ink containers out of reach of children.
• When replacing ink collector unit, avoid getting ink on your clothing. If ink comes into
contact with your clothing, wash the stained area with cold water. Hot water will set the
ink into the fabric and make removing the stain impossible.
• If ink gets into contact with eyes, wash eyes immediately with running water. Consult a
doctor if necessary.
Replacing an Ink Collector Unit
167