5. Machine Setup Menus
Using the [Maintenance] Menu
You can specify machine maintenance settings for adjusting print quality.
• When using the [Maintenance] menu, set the tray. Otherwise, some menus are not
displayed.
Nozzle Check
Print a test pattern to check that print head nozzles become clogged.
If nozzle problems occur, print head nozzles become clogged and ink cannot be ejected
properly.
This will result in lower print quality.
Head‐cleaning
You can clean the print head.
Clean the head if certain colors are not printed or are printed faintly.
Head cleaning consumes ink.
Head‐flushing
You can clean the print head more thoroughly.
Because head flushing consumes more ink than head cleaning, do it only if the print head
cannot be cleaned properly by head cleaning.
Head Position
You can resolve problems such as lines that are printed vertically misaligned or blurred colors.
Registration
Adjust the print start position of the fabric.
Date/Time
You can specify the date and time.
Key Repeat
The key repeat function allows you to specify setting values in units of ten or scroll the
display quickly by pressing and holding down the [ ] or [ /Menu] key.
Holding down the [Adjust Height ] or [Adjust Height ] key allows the height of the tray to
be quickly adjusted.
Default: [On]
Feed Test
Check how the tray works. Printing is not performed on the fabric.
Move Print‐Heads
Move the print head to make it easier to remove foreign objects stuck in the right edge.
When all operations are completed, turn the power back on and print a [Nozzle Check] test
pattern.
Height Adjust
You can adjust the height of the tray manually.
For details about how to adjust the height using the [Adjust Height ] and [Adjust Height ] keys,
see page 189 "Adjusting the Height of the Tray".
98