Normally, select [Auto Detect]. When printing is performed on fabrics of varied
thicknesses or a vertical aberration or blurring occurs, select [Always].
•
Auto Detect
•
Always
Default: [Auto Detect]
Img Recov. Error
You can specify whether or not [Page Recovery Error] is reported.
•
Display
•
Do not Display
Default: [Display]
Display Job Name
The name of the job is displayed on the screen from when the job is transmitted until
the [Start] key is pressed.
•
On
•
Off
Default: [Off]
Display Version
Displays the firmware version.
Printer Version
Displays the firmware version of the machine.
Ink C.U. Space
You can check the remaining capacity of the ink collector unit.
Changing the [System] Menu
The following procedure is an example of setting the Energy Saver mode.
1.
Press the [ /Menu] key.
2.
Press [ ] or [ /Menu] key to display [System], and then press the [#Enter] key.
<Menu>
System
3.
Press [ ] or [ /Menu] key to display [Energy Saver], and then press the [#Enter]
key.
<System>
Energy Saver
4.
Press the [#Enter] key.
Using the [System] Menu
123