Network Settings For Ethernet - Roland VersaStudio BT-12 Operating Instructions Manual

Network Settings for Ethernet
Make the following network settings according to the network interface you are using.
The following example explains how to allocate an IPv4 address.
1.
Press the [Power] key.
2.
Press the [ /Menu] key.
3.
Press the [ ] or [ /Menu] key to display the [Host Interface] menu, and then
press the [#Enter] key.
<Menu>
Host Interface
4.
Press the [ ] or [ /Menu] key to display [Network Setup], and then press the
[#Enter] key.
<Host Interface>
Network Setup
5.
Press the [ ] or [ /Menu] key to select [IPv4 Address], and then press [#Enter]
key.
<Network Setup>
IPv4 Address
The current IP address appears on the display.
Connecting the Computer and Installing the Software (Network Connection)
47