8. Maintenance
Cleaning
Clean the outside of the machine regularly to maintain the condition of the machine.
• Do not remove any covers or screws other than those explicitly mentioned in this
manual. Inside this machine are high voltage components that are an electric shock
hazard. Contact your authorized Roland DG Corporation dealer if any of the machine's
internal components require maintenance,adjustment, or repair.
•
Do not attempt to disassemble or modify this machine. Doing so risks burns and electric
shock.
• When performing maintenance on the machine, always disconnect the power cord from
the wall outlet.
To clean the exterior of the machine, wipe it with a soft, dry or damp cloth. If the dirt does not
come off, wipe the machine first with a cloth moistened with a neutral detergent, then with a
damp cloth, and finally with a dry cloth.
Do not use volatile chemicals like benzene or thinner, or insecticides on the machine. Using
•
these chemicals could deform, crack, or change the color of the machine.
When wiping the machine with a cloth moistened with detergent, be sure to wipe only the
•
exterior.
Cleaning the Top Cover
• Do not open the cover while the machine is operating and keep your hands or fingers
clear of the machine. Doing so might cause your hands or fingers to get trapped in the
machine, potentially causing injury.
172