9. Troubleshooting
Ink Collector Unit Almost Full
The ink collector unit is almost full.
Have a new ink collector unit handy.
• If an ink cartridge starts running out of ink when the ink collector unit is almost full, the alert
indicator will flash and a message informing you of the cartridge's low ink level will appear on
the display.
Ink Collector Unit Full
The ink collector unit is full.
Replace the ink collector unit.
See page 166 "Replacing an Ink Collector Unit".
Used Ink Collector Unit
A used ink collector unit is installed.
Replace the ink collector unit.
See page 166 "Replacing an Ink Collector Unit".
Out of Printable Temperature Range
Printing is not possible because the printer is placed in a location that is too hot or cold.
Move the machine to a more suitable environment.
1.
Press and hold down the [Power] key for one second.
2.
Place the machine in an environment where a temperature range is between 10
and 40°C (50 and 104°F).
3.
Turn the machine on.
• Even after the power is turned on, the machine may remain in standby mode until it
acclimates to the room temperature. If this happens, wait until the power lamp stops
flashing and stays lit.
• For details about what conditions the machine can be used under (ambient temperature and
humidity range), see page 24 "Checking the Computer and Installation Area"
214