8. Maintenance
Replacing Filters
If a message prompting you to replace the filter appears, replace it, and then reset the count for
the number of prints using the [Maintenance] menu.
1.
Prepare the filter to replace.
2.
Pinch the handle of the filter, and then pull it out.
3.
Insert the new filter firmly.
4.
Replace the filter of the opposite side in the same way.
5.
Press the [ /Menu] key.
6.
Press the [ ] or [ /Menu] key to display [Maintenance], and then press the
[#Enter] key.
7.
Press the [ ] or [ /Menu] key to display [Fan Filter], and then press the [#Enter]
key.
8.
Press the [ ] or [ /Menu] key to display [Reset count no.], and then press the
[#Enter] key.
9.
Check that "Press # to reset count no" is displayed, and then press the [#Enter]
key.
10.
Press the [Escape] key until the top screen appears.
170
DSB071
DSB072