5. Machine Setup Menus
1
1
3
3
1.
Top part
2.
Inner part
3.
Side part
7.
After cleaning the Maintenance Unit, close the top cover.
Head‐cleaning starts after restart, after which the machine returns to the usual condition.
Auto Head Maint.
You can clean the print head nozzles automatically. If the message prompting you to provide
regular maintenance appears, clean the print head.
• Do not put your hands inside the machine while cleaning of the print head nozzles is
automatically performed. Your fingers may be trapped and injured inside the machine.
•
Do not open the cover while the print head nozzles are being automatically cleaned.
•
You cannot reuse the absorbent. After using it, be sure to dispose it properly.
•
If you have not cleaned the maintenance unit, proceed to clean it.
116
2
2
DYX041