Siemens SIMATIC ET 200S Operating Instructions Manual page 316

2PULSE
5.4 Modes and Functions
Pin assignment for the parallel connection
The following terminals have to be connected at the terminal module for the parallel
connection of both channels of the 2PULSE:
● Terminal 3 and Terminal 7
● Terminal 4 and Terminal 8
You then connect the load (e.g. a final controlling element) directly to Terminals 3 and 4 or to
Terminals 7 and 8. The following figure shows a connection layout.
Figure 5-19
316
Parallel connection of both channels
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07