Terminal Assignment Diagram - Siemens SIMATIC ET 200S Operating Instructions Manual

4.4

Terminal Assignment Diagram

Wiring Rules
The cables (terminals 1 and 5 and terminals 4 and 8) must be shielded, twisted-pair cables.
The shield must be supported at both ends. To do this, use the shield contact (see the ET
200S Distributed I/O System (http://support.automation.siemens.com/WW/view/en/1144348)
operating instructions).
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07
4.4 Terminal Assignment Diagram
1SSI
237