Siemens SIMATIC ET 200S Operating Instructions Manual page 22

1Count24V
2.6 Count Modes
Influencing the Behavior of the Digital Outputs via:
● Hysteresis
● Pulse duration
(see section "Behavior Types of the Outputs in Count Modes (Page 37)")
Changing values during operation
The following values can be changed during operation:
● Load value (LOAD_PREPARE)
● Counter status (LOAD_VAL)
● Comparison value 1 (CMP_VAL1)
● Comparison value 2 (CMP_VAL2)
● Function and behavior of the digital outputs (C_DOPARAM)
(see section "Behavior Types of the Outputs in Count Modes (Page 37)" and "Assignment of
the Feedback and Control Interface for the Count Modes (Page 45)")
22
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07