Terminal Assignment Diagram - Siemens SIMATIC ET 200S Operating Instructions Manual

1Count5V

3.4 Terminal Assignment Diagram

3.4 Terminal Assignment Diagram
Wiring Rules
The cables (terminals 1 and 8 and terminals 15 and 16) must be shielded. The shield must
be supported at both ends. To do this, use the shield contact (see the ET 200S Distributed
I/O System (http://support.automation.siemens.com/WW/view/en/1144348) operating
instructions).
Table 3- 1 Terminal assignment of the 1Count5V
View
126
Terminal Assignment Remarks
A, /A: Track A
B, /B: Track B
N, /N: Track N
24 VDC: Sensor supply
M: Chassis ground
DI: Digital input
DO1: Digital output
DO2: Digital output
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07