Siemens SIMATIC ET 200S Operating Instructions Manual page 18

1Count24V
2.5 Operating modes and application areas of the 1Count24V
Integrate the 1Count24V with the GSD file
Select an entry in the GSD file that corresponds to the operating mode you want.
For counting modes, select
C 6ES7 138-4DA04-0AB0 1CNT24V
Note
Fast mode is designed for use in especially short isochronous cycles. You need STEP 7 to
configure isochronous operation.
18
Integrate the 1Count24V with the GSD file
(only in non-isochronous mode)
For measuring modes, select
M 6ES7 138-4DA04-0AB0 1CNT24V
Select the parameters.
For position feedback, select
W 6ES7 138-4DA04-0AB0 1CNT24V
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07