Siemens SIMATIC ET 200S Operating Instructions Manual page 179

Changing Values during Operation
The following values can be changed during operation:
● Low limit (LOAD_PREPARE)
● High limit (LOAD_VAL)
● Function of the digital output DO1 (C_DOPARAM)
● Integration time/update time (C_INTTIME)
(see sections "Behavior of the Outputs in Measurement Modes (Page 186)" and
"Assignment of the Feedback and Control Interfaces for the Measurement Modes
(Page 188)")
Technological Functions
Operating Instructions, 06/2010, A5E00124867-07
1Count5V
3.7 Measurement Modes
179