Siemens SIMATIC ET 200S Operating Instructions Manual page 200

Hide thumbs Also See for SIMATIC ET 200S:

Table of Contents

3.8 Fast mode

Synchronization with DI and Zero Mark

In order to use this function, you must first select it with the "HW enable for synchronization"

Function DI parameter.

If you have assigned synchronization with DI and zero mark, the DI serves as the HW

enable. When the HW enable is active, the 1Count5V is loaded with the load value by the

zero mark of the encoder.

Technological Functions

Operating Instructions, 06/2010, A5E00124867-07

Show Quick Links

Table of Contents