Line Feed - SATO CL408 Programming Manual

Programming Manual
Command Structure:
<ESC>Eaaa
aaa:
Example:
Placement:
Default:
Function:
To print multiple lines of the same character size without specifying a
new print position for each line. With the Line Feed command, specify
the number of dots you want between each line. Then, send an ASCII
<CR> at the end of each line of text. The printer automatically identi-
fies the size of the last character, moves down the number of dots spe-
cified, and begins printing the next line.
Input:
<ESC>A
<ESC>E010<ESC>H0050<ESC>V0050<ESC>L0202<ESC>S
THIS IS THE 1ST LINE
THIS IS THE 2ND LINE
THIS IS THE 3RD LINE
<ESC>Q1<ESC>Z
Output:
SATO RISC Printers

Line Feed

Number of dots (001-999) between the bottom of the
characters on one line to the top of the characters on
the next line
<ESC>E010
Preceding the text that will use the line feed function
None
2. Command Codes
61