Table of Contents
Advertisement
License Information
The interface uses various licensed third-party software packages during operation. To view
details about third-party packages and associated licensing, perform the following:
1.
In the General Status panel, click the License Information button. The
License Information dialog box opens.
Figure 21.
For a list of license packages, see the Network Ports and License Information guide on
the Extron website.
2.
To view a copy of a listed package license, click the link in the License column of the
desired package. A copy of the package license opens in a separate page.
3.
Click the Close button to close the dialog box.
Firmware Updates
To upload firmware to the CCI Pro 700, use the internal web page or the Toolbelt software.
For information on Toolbelt, see the Toolbelt Help file. To upload firmware to the CCI Pro 700
with the internal web page, perform the following:
1.
If necessary, download new firmware to a computer on the same network as the
CCI Pro 700 (see
2.
Open the internal web page in a browser (see
3.
In the Firmware Uploader panel, click the Browse button. The File Upload
dialog box opens.
NOTE: Valid firmware files have a .eff file extension.
4.
Navigate to the file location and select the applicable firmware file.
5.
Click the Open button. The dialog box closes.
6.
Click the Upload button.
CCI Pro 700 TouchLink Pro Conference Room Control Interface • Configuration Software
License Information Dialog Box
Firmware Download
on page 25).
Web Page Access
on page 20).
21
Advertisement
Table of Contents
