Table of Contents
Advertisement
•
•
Important Information You Need Before Installation
The order and types of setup tasks for the IPL EXP PDU4H expansion interface, and
for the IPCP Pro xi Series control processors and TouchLink Pro touchpanels and NBP
button panels they work with, are important. Pay close attention to them. Follow the
checklist
About the IPL EXP PDU4H
The Extron IPL EXP PDU4H Control System Expansion Interface provides centralized power
management for medium sized AV systems. The IPL EXP PDU4H works in combination
with IPCP Pro xi Series control processors. It can also be used as a standalone device by
manually controlling the outputs or by using Extron SIS commands for control of the unit
and power outputs without requiring a control processor.
The IPL EXP PDU4H includes the following features:
•
•
•
•
•
It provides remote individual AC output control, ability to create schedules, and aggregate
current sensing via software configuration or from the IPL EXP PDU4H embedded webpage.
It can also operate independently using Extron SIS commands, enabling seamless
integration for specialized applications.
Once configured, these systems allow users to remotely control, monitor, and troubleshoot
AV equipment, including display devices and switchers.
The unit includes an embedded web server, a circuit breaker, four switched AC power
outputs, four manual control inputs (contact closure ports exclusively for controlling each
power output), and a relay output port (for alert purposes).
Figure 1.
An IPCP Pro xi Series control processor is the centerpiece of a control system that features
Extron TouchLink Pro Touchpanels, Extron NBP Network Button Panels, and IPL EXP
expansion interfaces.
The GlobalViewer Enterprise application is sometimes referred to as "GVE."
Unless otherwise noted, in images of software or web pages, circled numbers
correspond to the like‑numbered procedural steps.
in the "Hardware Features and Installation" section starting on page 7.
Dedicated control and monitoring
of four AC power outputs
Standalone manual input control
for each AC output
A single relay output
Basic surge protection
Alarm notifications
IPL EXP PDU4H
•
Current sensing
•
Half rack enclosure
•
Embedded webpage
Optional cable kits
•
•
Compatibility with Extron IPCP Pro Q xi and xi
Series control processors
IPL EXP PDU4H • Introduction
setup
2
Advertisement
Table of Contents
