Reference Information; Default Factory Settings; Vn-Matrix System Port Usage - Extron electronics VNR 100 User Manual

Reference
Information
This section provides information about:
•
•
•
•
•

Default Factory Settings

Network settings (ETH0)
Controller
Configuration

VN-Matrix System Port Usage

The VN-Matrix system uses a variety of network port numbers for streaming and
intercommunication functions. Just as the universal "telnet" function typically uses TCP port
number 23, VN-Matrix uses specific port numbers for its operation.
The table on the following page lists the port numbers used by the VN-Matrix series
products. The port numbers are, in most cases, for the sender. Port numbers used for
receiving are less important in regards to security.
When configuring a network, make sure it allows traffic on the ports required for your given
application. The ports highlighted in yellow accommodate most simple applications.
Default Factory Settings
VN-Matrix Port Usage
Included Parts
Mounting the VNR 100
gcode Frame Translator Utility Instructions
IP address
Subnet mask
Gateway address
IP address
Port
User name
Password
192.168.254.254
255.255.255.0
192.168.254.253
192.168.254.254
5432
config
config
VNR 100 • Reference Information 20