Table of Contents
Advertisement
Software Overview
To design a graphical user interface (GUI) for the CCI Pro 700 and configure button
functions, perform the following steps:
1.
Download and install GUI Designer and Global Configurator Plus and Professional,
Toolbelt, or Global Scripter, as desired, to a computer connected to the same network
as the control processor and CCI Pro 700 (see
Software Installation
2.
Design and build the layout of the text and graphics using GUI Designer or download a
system template Global Configurator project from the Extron website.
3.
Import the layout or project to Global Configurator Plus and Professional.
4.
Assign functions to the text, graphics, and front panel buttons using Global Configurator
Plus and Professional, or use Global Scripter to program the system and program
functions for the buttons.
5.
Build and upload the project or program script to the control processor and interface.
Software Download
The programs can be downloaded from the Extron website (www.extron.com).
NOTE: An Extron Insider account is required to download Global Configurator Plus and
Professional.
Figure 19.
1.
Open a browser program and navigate to the Extron website.
2.
Click the Download tab (see figure 19,
3.
On the left sidebar, click the Software link (
TIP:
featured in the left sidebar or the software Download Center page, click the
associated link to go to the individual product page. Click the Download button
and skip steps 4 and 5.
4.
Navigate to Global Configurator Plus and Professional, GUI Designer, or Toolbelt.
CCI Pro 700 TouchLink Pro Conference Room Control Interface • Configuration Software
on the next page).
Software Download
If Global Configurator Plus and Professional, GUI Designer, or Toolbelt are
Software Download
).
1
).
2
below and
19
Advertisement
Table of Contents
