Input/Output Information Bar; Input Status - Extron electronics SSP 7.1 User Manual

Input/Output Information Bar

The Input/Output Information Bar, on the
right side of the screen, is visible in all tabs and
provides information about:
• The current input
o Selected input channel
o Source format
o Sampling frequency
o Encoded channels
• The current output
o Speaker configuration
o Listening mode
o Mode override selection
• Master volume
• Mute
N While the Master Volume value and Mute
status can be adjusted using the slider
bar and button in this panel, the Input
and Output status information in this
information bar is read only.

Input status

The input text box indicates the source
format (first line), the sampling frequency
(second line), and encoded channels (third
line).
The graphics box underneath highlights
the audio source's active channels in blue:
L = Left front
C = Center
R = Right front
LS = Left surround side
RS = Right surround side
S = Surround (only available with 3/1 or
2/1 sources): LS and RS carry a mono surround signal.
SB = Surround back
LFE = Low Frequency Effect (primarily used for subwoofer channel output)
Further information about the source format configuration from the SSP 7.1 front
panel can be found on page 3-6. To understand more about source formats, see
pages B-2 to B-4.
SSP 7.1 • Setup and Control Software 5-5 5-5