5.
If using Global Configurator Plus and Professional to set up the system, either:
Download a GC system template project (as mentioned in step 1), start Global
•
Configurator, open the template project, and configure the rest of the system as
desired. The embedded GUI layout can be exported, modified in GUI Designer, then
imported back into the GC project.
or
Create a layout for the interface using GUI Designer. Start a project in Global
•
Configurator. Import the GUI layout to the project and use GC to configure the
interface.
6.
If using Global Scripter to set up the system, create a layout for the interface using
GUI Designer then start Global Scripter. Import the GUI layout, program the control
processor and interface, and program button functions.
7.
Save the GC project or GS script file.
8.
Upload Global Configurator or Global Scripter files to the CCI Pro 700 interface.
9.
Test the system to verify that the button actions and LCD screen are working as
configured.
10.
Make adjustments to the configuration or programming if needed and upload the
revised file to the interface.
CCI Pro 700 TouchLink Pro Conference Room Control Interface • Installation
4