Reference Information; Mounting; Network Port Requirements; Button Replacement - Extron electronics TouchLink CCI Pro 700 User Manual

Reference
Information
This section contains reference information. Topics in this section include:
•
•
•
•
•

Mounting

The CCI Pro 700 can be placed on a flat surface such as a tabletop.

Network Port Requirements

See the Network Ports and License Information guide on the Extron website.

Button Replacement

The six function buttons (see
figure
replaced if they are assigned different functions when the device is customized.
The interface ships with the following default set of buttons installed:
•
•
•
•
•
•
•
The interface also ships with the following pairs of black optional buttons that can be used
to replace the Redial and Flash buttons:
•
Those buttons cannot be ordered separately from the interface.
NOTE: One blank function button is the same height as the default buttons to act
Other, additional replacement function buttons come in pre-packaged kits or can be ordered
individually. For a complete list of available options, see www.extron.com.
CCI Pro 700 TouchLink Pro Conference Room Control Interface • Reference Information
Mounting
Network Port Requirements
Button Replacement
Reset Modes
Firmware Download
figure
2,
) come installed in the CCI Pro 700, but any or all of these buttons can be
E
Redial and Flash (optional buttons)
Display On (function button)
Display Off (function button)
PC (function button)
Laptop (function button)
Video (function button)
Display Mute (function button)
Camera / Share
as an unlabeled function button. The other blank function button is level with the
interface surface when installed to keep from being pressed.
2, on page 5) and optional buttons (see
K
• Camera / Contacts • blank / blank
22