Table of Contents
Advertisement
F
G
H
I
J
K
L
M
N
Rear Panel Features
Rear Panel Access
To access the rear panel, remove the CCI Pro 700 from the base as follows:
1.
Dial buttons — Start or end conference calls (see
Mic mute button — Mutes or unmutes conference room microphones (see
previous page).
Number keypad buttons — Consist of alphanumeric characters for dialing phone
numbers or entering values (see
Navigation buttons — Navigate the setup menu, on-screen menus, and lists created
in the GUI. These buttons include the Up (
Navigation buttons as well as the
Transmit LED indicator — Lights according to function button activity (see
Function buttons — Select inputs or other configurable functions (see
Motion sensor — Detects motion and wakes the panel from Sleep mode (see
Pull-out tray — Houses important information (see
Status indicator — Lights green or red for various conference call conditions, such as
active conference calls or a muted microphone (see
Firmly hold the base and lift up the tab on the top of the CCI Pro 700 to dislodge the
CCI Pro 700 from the base.
Figure 3.
Pulling the Tab
CCI Pro 700 TouchLink Pro Conference Room Control Interface • Panel Features
figure
2,
).
H
>
<
), Left (◄), and Right (►)
), Down (
]
Navigation button (see
).
M
).
N
Interface
Base
on the previous page).
F
on the
G
).
I
).
J
).
K
).
L
6
Advertisement
Table of Contents
