Loading Paper On The Paper Feed Tray; Replenishing Paper - Savin 3350DNP Operating Instructions Manual

OPERATION

Loading Paper On The Paper Feed Tray

The Load Paper indicator (B) lights
when the paper feed tray runs out of
1
paper.

Replenishing Paper

A
Press the { { { { Clear/Stop} } } } key.
Program
Clear/Stop
Note
This step is necessary only if
you want to pause a print run to
replenish paper.
B
Press the Paper Feed Tray Down
key.
Note
The paper feed tray will lower
without the key being pressed
when printing paper runs out.
The top sheet might remain be-
tween the feed rollers. In this
case, remove the top sheet.
22
Clear Modes
Auto Cycle
Proof
Print
Enter
Start
TPES080N
TPEH130E
C
Load paper on the paper feed tray.
Note
If you wish to set a different
kind of paper, select the appro-
priate paper type with the [Ppr.
Type] key. See
On Various Kinds Of Paper".
Release the pads of the feed
side/end plates before loading
paper. Reset the pads after pa-
per is set.
Correct paper curl before set-
ting the paper.
D
Press the { { { { Print} } } } key to resume
printing.
Program Clear Modes
Enter
Clear/Stop
TPEY040E
P.42 "Printing
Auto Cycle
Proof
Print
Start
TPES070N