Table of Contents
Advertisement
OPTIONAL FUNCTIONS
Basically, set originals as shown be-
low.
R
2
R
When you have an optional memory
board and the original is set in a dif-
ferent direction from the print paper,
the machine automatically rotates the
original image by 90 to match the
print paper direction.
You cannot set originals of different
sizes at the same time.
When you use thin originals, set one
original at a time in the document
feeder or set them on the exposure
glass (contact glass).
The first 10 mm, 0.4", of the leading
edge and the last 2 mm, 0.08" of the
trailing edge cannot be printed. Make
sure the leading edge margin is at
least 10 mm, 0.4", and the trailing
edge margin is at least 2 mm, 0.08".
Do not stack originals above the limit
mark.
Setting Originals In The
Document Feeder
A
Adjust the guide to the original
size.
82
B
Set the aligned originals face up
into the document feeder.
GRSETT1E
Limitation
Approximately 30 originals (80
g/m
one time in the document feed-
er. The first (top) original will be
fed first.
Note
To avoid a multi-sheet feed,
shuffle the originals before set-
ting them in the document feed-
er.
The guides must fit snugly
against both sides of the stack.
C
Adjust any print settings as nec-
essary, then press the { { { { Start} } } } key.
Program
Clear/Stop
2
, 21 lb) can be inserted at
Clear Modes
Auto Cycle
Proof
Print
Enter
Start
TPEH350E
TPES050N
Advertisement
Table of Contents
