Table of Contents
Advertisement
Make-up Printing With The Optional
Document Feeder
Under the following conditions, you
should set command sheets and the
original on the exposure glass (con-
tact glass).
• When using paste-up originals.
• When the command sheets and
original are of different size.
With the optional document feeder,
you can designate areas to be edited
in Make-up mode within the follow-
ing limits:
4
1 = 3 mm, 0.12"
2 = 3 mm, 0.12"
3 = 3 mm, 0.12"
4 = 3 mm, 0.12"
Note
When using coated paper or trans-
parent paper as a command sheet,
set the command sheet and origi-
nal separately into the document
feeder.
1
2
3
GRCOMM0E
Make-up Printing With The Optional Document Feeder
A
Press the { { { { Make-Up} } } } key.
Stamp
Make-Up
Overlay
Skip Feed
Edge Erase
B
Make sure that [1] is selected.
Then press the [OK] key.
C
Select the frame shape with the
[ ], [ ], { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } } key.
D
Press the [OK] key.
Image Density
Lighter
On Line
Normal
Darker 1
Darker 2
Tint
Economy Mode
Job Separator
TPES310N
TPES560E
TPES530E
107
2
Advertisement
Table of Contents
