Regist. (User); Position (Date) - Savin 3350DNP Operating Instructions Manual

USER TOOLS

5-8 Regist. (User)

A
Press the { { { { User Tools} } } } key.
3
B
Enter 5 with the Number keys.
Then press the [OK] or { { { { Enter} } } } key.
C
Enter 8 with the Number keys.
Then press the [OK] or { { { { Enter} } } } key.
D
Select one of the four available
user stamps with the [ ], [ ],
{~}, or { { { { } } } } } } } } key.
Note
If the stamp you choose is al-
ready being used, the machine
asks whether you wish to over-
write it or not. Select the [Yes] or
[No] key.
158
User Tools
Image Density
Stamp
Lighter On Line
Normal
Darker 1
Make-Up
Darker 2
Overlay
Tint
E
Press the [OK] key.
F
Set the original you want to regis-
ter as a user stamp on the expo-
sure glass (contact glass).
TPES250N
a: 64 mm, 2.5"
b: 32 mm, 1.2"
Note
The image area as shown in the
illustration will be registered as
a user stamp.
G
Press the [Start] key.
H
Press the [Cancel] key.

5-11 Position (Date)

Note
TPES530E
The default position and available
settings of each date stamp are as
follows:
b
a
GRRUST0E
TPES560E