Table of Contents
Advertisement
Color Printing Using The Optional Color
Drum
Color drum units (red, blue, green,
and brown) are available as options in
addition to the standard black unit.
For making color prints, a separate
drum unit is necessary for each color.
Note
If the ink on the color drum dries,
use the Quality Start function. See
P.76 "Quality Start Mode— Re-
gaining The Image Density When The
Ink On The Drum Dries".
Making Color Prints
A
Make sure that the Color Drum
indicator is lit.
Drum
1
17 8 /
Color
2
B
Press the { { { { Start} } } } key.
C
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see
Print Image Position".)
D
Make your prints.
TPES024N
P.25 "Adjusting
Color Printing Using The Optional Color Drum
Changing The Color Drum Unit
A
Open the front door.
B
Lower lock lever B1.
C
Pull out the drum unit handle B2
slowly.
D
Lift upper drum stay B3 a little to
unlock the drum unit, then pull
2
TPEH071E
TPEH080E
TPEH090E
87
Advertisement
Table of Contents
