Making Prints - Savin 3350DNP Operating Instructions Manual

Making Prints

Before making prints using this ma-
chine, you have to make a master by
pressing the {Start} key. When you
press the {Start} key, the machine
scans the original image and makes a
master. This procedure describes
how to make basic prints.
A
Set your originals.
When you set original on the
exposure glass (contact glass)
A Set one original face down.
When you set originals in the
optional document feeder
A Set the originals face up.
vi
B
Press the { { { { Start} } } } key.
Program
Clear/Stop
C
Press the { { { { Proof} } } } key.
Program
Clear/Stop
TPEH270E
Check the print image.
Reference
When you want to change the
image position, see
justing Print Image Position".
When you want to increase the
image density, press the {W}
TPEH281E
key. See
Image Density".
When you want to decrease the
image density, press the {V}
Clear Modes
Auto Cycle
Proof
Print
Enter
Start
TPES050N
Clear Modes
Auto Cycle
Proof
Print
Enter
Start
TPES060N
P.25 "Ad-
TPES560E
P.26 "Adjusting Print