Table of Contents
Advertisement
Removing Misfed Paper in the Duplex
Feed Unit
You can remove misfed paper from
the Duplex Feed Unit following the
procedure below.
Note
❒ When a paper misfeed occurs in
the Duplex Feed Unit, the printer
usually sends the misfed paper to
the right cover and there is no need
to execute following procedure.
See "When "Remove Misfeed A:Inter-
nal Path" Appears" in Maintenance
Guide 2.
Important
❒ Be sure to remove a misfed paper
following the procedure below,
o n ly w h en "R em ov e M i sfeed
Z2:Dup. Feed Unit" appears on the
panel display.
A
Turn off the power switch and
unplug the power cable.
B
Open the front cover slowly by
pulling down from the two areas
on the left and right.
3. Appendix
C
Take out the green screwdriver.
Use this screwdriver for all attach-
ment and detachment of screws.
D
Remove the screw that is fasten-
ing the Duplex Feed Unit using
provided screwdriver.
You will use this screw to refasten
the Duplex Feed Unit later.
ZDJH007J
ZDJH013J
ZDJP221J
45
Advertisement
Table of Contents
