If You Cannot Make Prints As You Want
Problem
Misfeeds occur frequently. Improper paper type is se-
When you try to set several
functions at a time, you
cannot set some functions.
Parts of the image are not
printed in Edge Erase
mode.
Prints are blank or parts of
the image are not printed.
Combine Originals Mode
Problem
Prints are blank or parts of
the image are not printed.
Print image is not correct.
Cause
lected with the [Ppr. Type]
key.
Some functions cannot be
used together.
Erase margin is too wide.
Edge margins of original
are too narrow.
The paper feed side/end
plates are not set correctly.
Cause
Original size and direction
are not correct.
Original set order is not
correct.
If You Cannot Make Prints As You Want
Action
Select proper paper type.
See
P.42 "Printing On
Various Kinds Of Paper".
See
P.198 "Combination
Chart".
Set a narrower erase mar-
gin with the user tools. See
P.150 "3-9 Margin Erase
Area".
Make sure that the paper
feed side/end plates touch
the paper lightly.
Action
You cannot use originals of
different sizes and direc-
tions in Combine Originals
mode. Use originals of
same size and direction.
Set originals face up into
the optional document
feeder. The first original
should be on the top.
Set original face down on
the exposure glass (contact
glass). The first original
should be set first.
4
167