Table of Contents
Advertisement
What To Do If Something Goes Wrong
x Clearing Misfeeds
R CAUTION:
• Be careful not to cut yourself on any sharp edges when you reach
Note
After clearing the misfeeds, make
sure that all the doors, covers, and
units are closed and the x indica-
tor is off.
To prevent misfeeds, do not leave
4
any torn scraps of paper, originals,
or masters in the machine.
When clearing misfeeds, do not
turn off the main switch. If you do
your print settings will be cleared.
If misfeeds occur repeatedly, con-
tact your service representative.
x
x
x + A" Paper Misfeed In The
"x
Paper Feed Section
A
Remove the misfed paper.
- To prevent paper misfeeds:
-
-
-
Check the following before restarting
the printing run.
168
inside the machine to remove misfed sheets of paper or masters.
• Did you select appropriate paper
type with the [Ppr. Type] key?
• Are the side plate pads in the cor-
rect positions?
To print on thin paper (47.1 g/m
12.5 lb), slide the levers (behind the
paper feed side/end plates) in the
direction of the arrow (see illustra-
tion).
• When paper is curled, correct the
curl as shown.
TPES520E
TPEY060E
2
,
Z066
Advertisement
Table of Contents
