No. Of Skip Feed - Savin 3350DNP Operating Instructions Manual

Note
You can also enter the ratio
with the Number keys and
the {Enter} key.
If you selected *
A Enter the erase edge margin
with the Number keys.
B Press the { { { { Enter} } } } key.
C Enter the vertical length of pa-
per you use with the Number
keys.
D Press the { { { { Enter} } } } key.
E Enter the horizontal width of
paper you use with the Num-
ber keys.
F Press the { { { { Enter} } } } key.
G
Press the [OK] key twice.

4-11 No. of Skip Feed

The following procedure explains
how to change the number of drum
rotations.
A
Press the { { { { User Tools} } } } key.
User Tools
Stamp
Make-Up
Overlay
Image Density
Lighter On Line
Normal
Darker 1
Darker 2
Tint
TPES250N
User Tool Menus In Detail
B
Enter 4 with the Number keys.
Then press the [OK] or { { { { Enter} } } } key.
C
Enter 11 with the Number keys.
Then press the [OK] or { { { { Enter} } } } key.
D
Press the [Change] key.
E
Change the number of drum rota-
tions while one sheet of paper is
fed with the [ ], [ ], { { { { ~ ~ ~ ~ } } } } , or { { { { } } } } } } } }
key.
Note
You can also change the num-
ber of rotations with the Num-
ber keys.
F
Press the [OK] key.
3
TPES520E
TPES530E
151