Recalling A Program; Protecting A Program - Savin 3350DNP Operating Instructions Manual

Recalling A Program

A
Press the { { { { Program} } } } key.
Program Clear Modes
Enter
Clear/Stop
B
Make sure that [Recall] is selected.
C
Press the [OK] key.
Note
Programs that have been stored
beforehand are represented by a
number.
D
Select the program number you
want to recall with the [ ], [ ],
{~}, or { { { { } } } } } } } } key.
Note
You can also select the program
number with the Number keys.
E
Press the [OK] key.
F
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
Auto Cycle
Proof
Print
Start
TPES190N
TPES530E
Program—Storing Your Print Settings In Memory
G
Press the { { { { Start} } } } key.
Program Clear Modes
Enter
Clear/Stop

Protecting A Program

If you want to prevent someone from
writing over your program, do the
following procedure.
A
Press the { { { { Program} } } } key.
Program Clear Modes
Enter
Clear/Stop
B
Select [Protect] with the [ ] or { { { { ~ ~ ~ ~ } } } }
key.
C
Press the [OK] key.
Note
Already protected
numbers are shown with a
black background (e.g.A).
Auto Cycle
Proof
Print
Start
TPES050N
Auto Cycle
Proof
Print
Start
TPES190N
TPES550E
program
73
1