Set User Code (S) - Savin 3350DNP Operating Instructions Manual

USER TOOLS
No. Mode
13 Direction
(Page)
3
14 Position (Page)
15 Make/Chg.
Pattern

6. Set User Code (s)

User Code
If the machine is set to use the User Code function, operators must input their user
codes before the machine can operate. The machine keeps count of the number of
copies made under each user code. Turn on User Code mode with the "Set User
Code (s)" user tool. You can also turn on Key Operator Code mode. In Key Opera-
tor Code mode, only the selected key operator can use all the functions below.
1 Check Counter
146
Description
You can select the page numbering direction at power on in
Page Stamping mode.
Note
Default:
• When you select [P1, P2] or [
(Page)" user tool: Upper right
• When you select [-1-, -2-] with the "Type (Page)" user
tool: Down center
You can edit the preset page numbering position co-ordi-
nates.
Note
Default: See P.160 "5-14 Position (Page)".
Available settings: See
Reference
For how to adjust the page numbering position, see
P.160 "5-14 Position (Page)".
Make your own background pattern in Make-up mode.
Note
You can edit the 40 preset patterns.
Reference
For how to change the background pattern, see
"5-15 Make/Chg. Pattern".
You can check the number of masters and copies made
under each user code.
Reference
For how to check the number of masters and copies,
see P.162 "6-1 Check Counter".
/ , / ] with the "Type
1 5 2 5
P.160 "5-14 Position (Page)".
P.161