Table of Contents
Advertisement
When color shifting occurs
Perform this procedure when color
shifting occurs even after performing
"Auto Adjust".
A
L or larger paper in the
L
L
Load A4L
Bypass Tray.
Note
❒ Be sure to select paper size in
the "Paper Input" menu.
Reference
For details about paper size and
the procedure for loading paper
in the Bypass Tray, see "Loading
Paper" in Maintenance Guide 2.
B
Press { { { { Menu} } } } .
On Line
Menu
Job Reset
Form Feed
Power
Error
"Menu" appears on the panel dis-
play.
C
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Maintenance", and then press
{ { { { Enter} } } } .
Menu:
Maintenance
The maintenance menu is dis-
played.
D
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Col-
or Regist.", and then press { { { { Enter} } } } .
Maintenance:
Color Regist.
E
Escape
#
Enter
Data In
F
ZDJS001N
G
Adjusting the Color Registration
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Fus-
er Adjust", and then press { { { { Enter} } } } .
Color Regist.:
Fuser Adjust
Important
❒ When the toner cartridge is al-
most empty, or Auto Adjust is
not finished, the following mes-
sage appears on the panel dis-
play and "Fuser Adjust" is not
available.
Cannot Adjust
See User's Guide
Confirm that the toner cartridge is
installed. The toner cartridge must
be installed. See P.3 "Replacing the
Toner Cartridge".
If the toner cartridge is installed,
perform "Auto Adjust". See P.34
"Auto Adjust".
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Cus-
tom Adjust", and then press { { { { En-
ter} } } } .
The following message appears on
the panel display.
Fuser Adjust:
Custom Adjust
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display the
paper types and resolution in
which color shifting occurs, and
then press { { { { Enter} } } } .
Custom Adjust:
Plain: 600dpi
Select a value from "Plain: 600dpi",
" P l a i n : 1 2 0 0 d p i " a n d " T h i c k :
600dpi".
2
37
Advertisement
Table of Contents
